Reed Organ (Reed Organ 1 - Reed Organ 2 - Reed Organ 1 Exp - Reed Organ 2 Exp) (LibVL-SK001_100.SYS-file 166Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Tubular Bell (Tubular Bell Ac - Tubular Bell FM - Tubular Bell 2x - Tubular Bell TW- Tub Bell on ff) (LibVL-SK003_100.SYS-file 1054Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Hand Bell (Tonechimes - T.Chime Damped - Hand Bell - H.Bell Damped - TC Hymn Pcd - TC HarmChim Pcd - HB+TC 4tet Pcd - Wine Glass - Mr.Lawrence - Glass Harp - Glass Harp Pad) (LibVL-SK004_100.SYS-file 1685Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Chamber Strings 1 - (For this library you must have 'System-upgrade Release4' or higher installed) This library provides chamber strings such as Marcato, Staccato, Pizzicato and Solo Violin. The instruments are recorded in stereo except solo violin. The voices containing 'Pcd' in the name, feature 'PROCHORD' function which allows you to play complex harmonies on the upper manual using single notes. (Marcato Str. - Marcato Str. Oc - Marcato feat.Vn - Stacc. Str. - Pizz Str. - Tape Str. - Marc+Stacc Str - Solo Violin - Duo Violin Pcd - Vn + Marcato Pcd - Marc. Open Pcd - Marcato Str.Pcd) (LibVL-SK005_100.SYS-file 9378Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Choir and Vocal - (For this library you must have 'System-upgrade Release4' or higher installed) This voice library provides the sounds of choir and solo vocal. The instruments are recorded in stereo except solo vocal. The voices containing 'Pcd' in the name, feature 'PROCHORD' function which allows you to play complex harmonies on the upper manual using single notes. (Aah - Doo - Vocal Aah - Choir Ft. Vocal - Choir Pad - Vocal and Str. Pcd - Vocal and Cho. Pcd) (LibVL-SK006_100.SYS-file 7159Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Toy Piano - This voice library provides the sounds of toy pianos. (The toy pianos are made by 2 different manufactures) - Toy Piano Sch: This instrument is a toy piano that has tone bars and belly sound. It sounds mechanical noise when a key is released too. - ToyPf Sch NoRel: The tone is same as above instrument, but it does not sound when a key is released. - ToyPf Sch Pan: The tone is same as Toy Piano Sch. You can hear the slowly rotating effect by the Auto-Pan. - Toy Piano Kaw: This instrument is a toy piano that has aluminum pipes and precision pitch. It sounds mechanical noise when a key is released too. - ToyPf Kaw NoRel: The tone is same as above instrument, but it does not sound when a key is released. - ToyPf Kaw MoDly: The tone is same as Toy Piano Kaw. You can hear the modulated delay effect by the Flanger. (LibVL-SK007_110.SYS-file 1720Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Backing Strings - (For this library you must have 'System-upgrade Release3' or higher installed) This voice library provides the sounds of backing strings, suitable for playing long-toned chords. (Synth Str. Fast Mellow - Synth Str. Slow Mellow - Synth Str. Fast Bright - Synth Str. Slow Bright - Synth Str. Oct - Warm Pad - Sweep and S/H - Pluck and Sweep - Out of The Blue - Synth and Chamber. Str) (LibVL-SK008_100.SYS-file 6995Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Backing Strings (Light Edition) - (For this library you must have 'System-upgrade Release3' or higher installed) This voice library provides the sounds of backing strings, suitable for playing long-toned chords. (Voices are the same as VL-SK008 but resolution and memory-consumption is lower) (Synth Str. Fast Mellow - Synth Str. Slow Mellow - Synth Str. Fast Bright - Synth Str. Slow Bright - Synth Str. Oct - Warm Pad - Sweep and S/H - Pluck and Sweep - Out of The Blue - Synth and Chamber. Str) (LibVL-SK009_100.SYS-file 1375Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Chamber Strings 2 - (For this library you must have 'System-upgrade Release3' or higher installed) This voice library provides the sounds of "Marcato" and "Tremolo" chamber strings in constrast to VL-SK005. The instruments are recorded in stereo except solo vocal. The voices containing 'Pcd' in the name, feature 'PROCHORD' function which allows you to play complex harmonies on the upper manual using single notes. (Marcato Str. - Marcato Str. Oc - Marcato and Tremolo - Tremolo and Marcato - Tremolo Str. - Marc. Open Pcd - Marc and Trem. Pcd) (LibVL-SK010_100.SYS-file 9955Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Synth. 1 - (For this library you must have 'System-upgrade Release3' or higher installed) This voice library provides the sounds of Synthesizer essentials. The voices containing 'Pcd' in the name, feature 'PROCHORD' function which allows you to play complex harmonies on the upper manual using single notes. (Noise Lead - Soshun Lead - OPZ LFO - OPZ LFO Perc - Sync Lead UD - Sync Lead D - PWM Lead - PWM Pad - Bird Low Brass - Bird Oct Brass - 3Phase Str. - 3Phase Str. Buz - Pulse Clav. - Pulse Clav. Oct - Plucked Saw - Take On Me - Material Lead - Flanged Koto - Sqr. Whistle - Tel. Line Lead - Gimme3 Lead - It's A Miracle - Chocolate Seq - Puttin Ritz Pcd) (LibVL-SK011_100.SYS-file 4545Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
80's Layered - This voice library provides the sounds of layered Synth Pianos that were popular in the 1980's. (You must upload and install the new system software 'SK updater Release 4, Main 1.112' or later) (80's Layered Pf - Ac and El Piano) (LibVL-SK012_100.SYS-file 3315Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Orchestral Harp - This voice library provides the sounds of Orchestral Harp. (You must upload and install the new system software 'SK updater Release 4, Main 1.112' or later before you install this library) (Pedal Harp - Pedal Harp Pad - Whole Tone C - Whole Tone F) (LibVL-SK013_100.SYS-file 1941Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Jazz Guitar - This voice library provides the sounds of a traditional 'Big Box' Jazz guitar. (You must upload and install the new system software 'SK updater Release 4, Main 1.112' or later before you install this library) (JazzGt.1 Open - JazzGt.1 Mute - JazzGt.1 Mu/Op - JazzGt.1 Oct - JazzGt.2 - JazzGt.3) (LibVL-SK014_100.SYS-file 777Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Melodion - This voice library provides the sounds of the melodion, which is essentially a harmonica played with a keyboard. (You must upload and install the new system software 'SK updater Release 4, Main 1.112' or later before you install this library) (Baritone Keyed - Baritone Vib - Bari+Alto - Alto1 Keyed - Alto1 Vib - Alto1 Twin - Alto1 Overdrv - Alto2 Keyed - Alto2 Vib - Soprano Keyed - Duet Pcd - SmallCombo Pcd - Quarted Pcd) (LibVL-SK015_100.SYS-file 1586Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Electric bass - This voice library provides the sounds of an electric bass guitar. (You must upload and install the new system software 'SK updater Release 4, Main 1.112' or later before you install this library) (Finger Bs Jz - Finger Bs Pr - Pick Bs Jz - Pick Bs Pr - Slap Bs Jz - Finger Bs+Cyms - Finger Bs+Ride - Finger Bs+HH - PickLngBs+HH) (LibVL-SK016_100.SYS-file 1928Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Taped Sampler - This voice library provides classic sounds from keyboard instruments made starting from the 1950's which played recordings of real instruments made on magnetic tape. In the 1970's, 80's and 90's, these instruments were used by many popular rock groups to give a symphonic sound to many of their songs. The sounds produced by these instruments have some unique characteristics which are sought after even to the present day. (This library requires 'Software Release 3 MAIN 1.112' or later) (Violins - Flute - Choir Mix) (LibVL-SK017_100.SYS-file 5688Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Synth M12 - This voice library provides classic sounds from the famous 'M12' synthesizer. This classic instrument from the 80's used analog sound generators, the sounds from which were then shaped and manipulated by various means. This instrument was unique in that it used digital circuitry to implement voltage control over all the sound-producing components (VCO, VCF and VCA). Groups such as 'Depeche Mode' and 'Vangelis' took advantage of this instrument's unique ability to generate big majestic brass sounds which are represented in this library.(This library requires 'Software Release 3 MAIN 1.112' or later) (Box Brass - Brazz - Horn Ensemble) (LibVL-SK018_100.SYS-file 6851Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Symphonic Strings - This voice library provides the sounds of a larger string ensemble such as a studio orchestra. (This library requires 'Software Release 3 MAIN 1.112' or later) (Arco Strings - Arco Strings Dual - Arco Strings Oct - Arco Strings oPcd - Arco Strings cPcd - Classic Strings - Classic Strings Dual - Classic Strings Oct - Classic Strings Big - Classic Strings oPcd - Classic Strings cPcd - Classic / Arco Vsw - Strings Pad) (LibVL-SK019_100.SYS-file 6193Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Symphonic Strings 2 - This voice library provides the sounds of a medium-size string ensemble. (This library requires 'Software Release 3 MAIN 1.112' or later) (Marcato Strings - Marcato Strings Dual - Marcato Strings oPcd - Marcato Strings cPcd - Pizzicato Strings - Pizzicato Strings Oct - Pizzicato Strings oPcd - Pizzicato Strings cPcd) (LibVL-SK020_100.SYS-file 3449Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Pf and Symphonic Strings - This voice library provides the sound of a string ensemble layered with grand piano. (This library requires 'Software Release 3 MAIN 1.112' or later) (St. Pf and Str - Mono Pf and Str - Pf and Str Pcd) (LibVL-SK021_100.SYS-file 14357Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Synth Heavy Stack - This voice library provides the sounds of "Heavy" Synth Pads and Ensembles. (This library requires 'SK updater Release 4, MAIN 1.112' or later) (Keyboard Hero - 80's Hyptronic - Polysynth Ensemble - PF Sweep Lead) (LibVL-SK022_100.SYS-file 8213Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Acoustic Guitar (Nylon String - Nylon St. vVib - Nylon St. Nail - Nylon St.N vVib - Steel String - 12 String - Flamenco - Flamenco vVib) (LibVL-SK024_100.SYS-file 3378Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Ethnic - This voice library provides the sounds of instruments used in Ethnic music.(This library requires 'System Software Release 4, MAIN 1.112' or later - Dulcimer: This is a Hammered Dulcimer, a steel-string instrument played by striking the strings with small hammers. - Sitar: This is an instrument closely associated with classical music of India. Programming a connected Foot Switch or the OCTAVE Touch Buttons for the Glide function will allow the player to add portamento to the notes, which is an essential part of Sitar technique. - Banjo: This is a 5-string resonator Banjo, an instrument closely associated with American country, folk and bluegrass music as well as traditional Irish music. - Koto: This is the traditional Japanese 13-stringed instrument. - Koto Hira#: Same sound as Koto but with the traditional “Hirajoshi” tuning. This tuning uses the notes D, D#, G, A and A#. Playing the black notes (sharps) only will cause this scale to sound. Pressing and holding a connected Damper Pedal will cause the sound of all of the above-described instruments to sustain.) (LibVL-SK025_100.SYS-file 2500Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Mallet Percussion - This voice library provides the sounds of Mallet Percussion instruments Xylophone and Marimba.(This library requires 'System Software Release 4, MAIN 1.112' or later) - Xylo. Duo Pcd: Xylophone with added Duo (two-note) ProChord. - Xylo. 4tet Pcd:vXylophone played with 4 mallets. 4-part open hamony ProChord added. - Marimba: Concert Marimba. Deeper tone and pitched one octave lower than Xylophone. - Marimba Sustain: Marimba with added long sustained tone and vibrato. Similar in sound to Vibraharp, but with a deeper tone. - Xylo + Marimba: Xylophone and Marimba together, sounding in octaves. - Marimba Trem: Marimba played by alternating mallets to produce a "Tremolo". To use as a synth pad, turn on the [EXTRA VOICE EFFECT] button, select "Phaser", and play chords. - Marimba Duo Pcd: Marimba Trem with added Duo (two-note) ProChord. - Marimba 4tet Pcd: Marimba played with 4 mallets. 4-part closed hamony ProChord added.
SOUNDS FEATURING “PROCHORD” FUNCTION: Extra Voice instruments that contain "Pcd" in their description feature Hammond's exclusive ProChord function. When notes or chords are played on a Lower Manual and a note is played on an Upper Manual, the note represented by the key played on the Upper Manual is heard along with a scored harmony pattern which sounds according to the Chord Root and Chord Type selected by the notes played on the Lower Manual.
Sk1, Sk1-73, Sk1-88: The SPLIT feature must be enabled (SPLIT Touch Tab “ON”) and a note or chord played to the left of the Split point in order for the harmony to sound when notes are played to the right of the Split point.
Sk2: A note or chord must be played on the Lower Manual in order for the ProChord harmony to sound when notes are played on the Upper Manual.
On both the Sk1 and Sk2, the harmony will sound ONLY if Lower Manual notes are pressed and held while the melody is played. If no Lower Manual notes are held, only the Melody note will sound. Also, when a ProChord Extra Voice is selected, play a single-note melody with the right hand while holding Lower Manual notes or chords so that the harmony will play correctly. If you wish to play chords using a ProChord Extra Voice, it is best if no Lower Manual notes are pressed and held at the same time. (LibVL-SK026_100.SYS-file 1460Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.
Harmonica - This voice library provides the sounds of Harmonicas.(This library requires 'System Software Release 4, MAIN 1.112' or later - Chro Normal: Suzuki Chromatic Harmonica S-56C with a small amount of Vibrato. We recommend using this voice with some Reverb. - Chro Vibrato: Similar to Chro Normal, with added traditional Harmonica Vibrato. Bass notes added from the Suzuki Bass. - Chromatic Harmonica S-48B - Chro Detune: A variation of the Chromatic Harmonica with slight detuning. - Chro Whistle: A variation of the Chromatic Harmonica with a whistling tone. - Chro Duet Pcd: Two Chromatic Harmonicas playing in harmony using the ProChord feature.
UTILIZING THE "PROCHORD" (Pcd) FEATURE The "Chro Duet Pcd" voice utilizes Hammond-Suzuki’s exclusive "ProChord" feature which adds harmonies to single notes played on the upper manual based on chords played on the lower manual. For the Sk1 and Sk2, allocate the "Pcd" voice to the Upper Manual and using the SPLIT function of the Sk1, or the Lower Manual of the Sk2, assign the Organ (TW, Vx, Farf or Pipe) registration of your choice to the Lower Manual. For the SKX, it is recommended you assign the "Pcd" to EXV1, assign EXV1 to the Upper Manual and turn the ORGAN section "OFF" for the Upper Manual. Then, assign either an Organ (TW, Vx, Farf or Pipe) or an EXV2 registration of your choice to the Lower Manual. NOTE: The ProChord feature functions independently of the Lower Manual registration – the harmony will still be heard even with no Organ or Extra Voice registration for the LOWER manual.
- Single: The sounds of the Suzuki S-22C Harmonica. A lighter, brighter voice. - BChro Normal: Suzuki Bass Chromatic Harmonica S-48B without Vibrato. This instrument is used in the middle-bass range in a harmonica ensemble, but also suitable for melodies. - Bass Stacc: Suzuki Bass Harmonica SDB-39 played staccato. This instrument is used for bass lines, but also works well when used along with an Electric Bass voice in unison (for example, "I Know There’s An Answer" by the Beach Boys). - Synth: Synthesized harmonica tone. (LibVL-SK027_100.SYS-file 2010Kb)
How to download and install a Voice-Library file for your SK
1: Copy the file Prepare your USB flash drive by initializing it on your SK1/SK2. (see owners manual) Insert the USB flash drive on your PC, and copy the Library file(s) into specified folder of USB flash drive. Hammond > sk > lib
2: Load the Library Insert the USB flash drive into your SK. Locate the “LIBRARY” function mode by operating [MENU/EXIT] > [UP] (select E) > [RIGHT] (locate the cursor at LIBRARY) > [ENTER]. The display shows a library file and “[ENT] to Load”. Choose the voice library file by using [UP][DOWN], and press [ENTER]. The load procedure will begin with displayed “Loading LIBRARY”. The load procedure is ended when the “[ENT] to Load” displayed again. You can remove the USB flash drive.
3: Using the loaded voice library Press the [LIBRARY]. At the factory default, the “Tr. Organ VxJ” is selected for voice group in the [LIBRARY] button, the cursor located at “instrument”. Locate the cursor at voice group by pressing [LEFT], choose the loaded voice library by turning [VALUE]. Locate the cursor at instrument by pressing [RIGHT], choose an instrument which you wish to play.